Installing a Green Air Central Heating system usually means replacing an old, inefficient gas or oil burning system with a modern, efficient, sustainable one. Sometimes that also means replacing some old, undersized radiators with new, super efficient ones.
Historically, oil or gas installers tended to fit undersized radators that were powered by over heated water from over-sized boilers. It meant fitting one big boiler, plus numerous smaller, easier to handle radiators and which produce pulses of high temperatures designed to deliver the required average rather than a steady constant temperature.
Green Air software will help us isolate the heat load requirements for each room in your home, and what radiator capacity is required to meet it. Where a replacement is required Green Air can supply and fit them as part of the installation, saving you the bother of engaging additional engineers.
We recommend and fit Eco Rad radiators. They are dazzling white, have a high gloss stove-enamelled finish, and are scratch/corrosion-resistant and long lasting. They offer;
- Maximum heating efficiency - The convector fins are welded directly to the waterways, increasing the extent of the effective heating surface
- Manufactured from the finest 1.25mm cold rolled steel
- Every single unit is tested to 12 bar (174 psi) which guarantees a working pressure of 10 bar (145 psi)
- Manufactured under EN ISO 9001
- Available in 5 heights - 300/400/500/600/750mm - and a wide range of lengths from 400mm up to 3,000mm
- 10 Year Warranty